Sovol SV06 Plus
Sovol SV06 Plus
Printer Highlights
About Sovol SV06 Plus
Sovol SV06 Plus is an open-frame Bedslinger FDM 3D printer with a 300 × 300 × 340 mm build volume, up to 250 mm/s print speed, a 300°C hotend, a 100°C heated bed, a planetary direct drive extruder with extended melt zone, and auto bed leveling.
General Information of Sovol SV06 Plus
Printer Name
Sovol SV06 Plus
Brand
Sovol
Series
SV
Release Date
February 2023
Build Volume & Chassis of Sovol SV06 Plus
Build Volume
300 x 300 x 340 mm (11.8 x 11.8 x 13.4 in)
Build Volume (X)
300 mm (11.8 in)
Build Volume (Y)
300 mm (11.8 in)
Build Volume (Z)
340 mm (13.4 in)
Enclosed Chamber
No
Frame Type
Reinforced Aluminum Open Frame
Machine Size
520 x 480 x 680 mm (20.5 x 18.9 x 26.8 in)
Machine Weight
11.5 kg (25.4 lbs)
Motion System & Kinematics of Sovol SV06 Plus
Kinematics Type
Bedslinger
Motion Axis Type
All-Metal Precision Smooth Rods & Linear Bearings
Kinematics Layout
Bedslinger Cartesian
Rail System
Hardened Steel Smooth Rods
Dual Z-Axis
Yes
Extruder & Toolhead of Sovol SV06 Plus
Extruder Type
Planetary Direct Drive Extruder with Extended Melt Zone
Toolhead Count
1
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
High-Flow Brass Volcano Nozzle
Supported Nozzle Diameters
0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
300°C
Multi-Material Ready
No
Max Colors / Materials
1 Color
Bed & Thermal System of Sovol SV06 Plus
Build Plate Type
Magnetic Flexible PEI Spring Steel Sheet
Heated Bed
Yes
Max Bed Temperature
100°C
Actively Heated Chamber
No
Print Speed & Performance of Sovol SV06 Plus
Max Print Speed
250 mm/s
Typical Print Speed
150 mm/s
Max Acceleration
4,000 mm/s²
Max Flow Rate
25 mm³/s
Min Layer Height
0.08 mm
Max Layer Height
0.35 mm
Speed Benchy Time
30 min
Automation & Electronics of Sovol SV06 Plus
Auto Bed Leveling
Yes
Leveling Sensor Type
Inductive Auto-Leveling Sensor (25-point mesh)
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
No
Built-in Camera
No
First Layer LiDAR
No
Part Cooling Fan
5015 High-Flow Blower Fan
Hotend Fan
4010 Axial Cooling Fan
Software & Connectivity of Sovol SV06 Plus
Firmware
Marlin 2.0 (32-bit Silent Board)
Compatible Slicers
Sovol Cura / PrusaSlicer
Connectivity
USB, MicroSD
Display Screen
4.3-inch Color Touchscreen
Input Voltage
100-240V AC, 50/60Hz
Special Features
Large 300x300x340mm volume, High-flow extended hotend, Planetary direct drive, Dual Z-axis synchronization
Try to Compare Sovol SV06 Plus With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
