Elegoo Neptune 4 Plus
Elegoo Neptune 4 Plus
Printer Highlights
About Elegoo Neptune 4 Plus
Elegoo Neptune 4 Plus is an open-frame Cartesian FDM 3D printer with a 320 × 320 × 385 mm build volume, up to 500 mm/s print speed, a 300°C hotend, a 110°C heated bed, a proprietary dual-gear direct drive extruder (5.2:1 ratio), and auto bed leveling.
General Information of Elegoo Neptune 4 Plus
Printer Name
Elegoo Neptune 4 Plus
Brand
Elegoo
Series
Neptune
Release Date
September 2023
Build Volume & Chassis of Elegoo Neptune 4 Plus
Build Volume
320 x 320 x 385 mm (12.6 x 12.6 x 15.2 in)
Build Volume (X)
320 mm (12.6 in)
Build Volume (Y)
320 mm (12.6 in)
Build Volume (Z)
385 mm (15.2 in)
Enclosed Chamber
No
Frame Type
All-Metal Integrated Frame with Dual Diagonal Support Rods
Machine Size
578 x 533 x 640 mm (22.8 x 21 x 25.2 in)
Machine Weight
14.4 kg (31.7 lbs)
Motion System & Kinematics of Elegoo Neptune 4 Plus
Kinematics Type
Cartesian
Motion Axis Type
All-Metal Linear Bearing Rollers with Dual Z-Axis
Kinematics Layout
Cartesian-XZ-Head Y-Bed High-Speed
Rail System
Hardened Steel Double U-Shaped Metal Guide Wheels
Dual Z-Axis
Yes
Extruder & Toolhead of Elegoo Neptune 4 Plus
Extruder Type
Proprietary Dual-Gear Direct Drive Extruder (5.2:1 Ratio)
Toolhead Count
1
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
Extended High-Flow Copper-Alloy Nozzle
Supported Nozzle Diameters
0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
300°C
Multi-Material Ready
No
Max Colors / Materials
1 Color
Bed & Thermal System of Elegoo Neptune 4 Plus
Build Plate Type
Flexible Textured PEI Spring Steel Sheet
Heated Bed
Yes
Max Bed Temperature
110°C
Actively Heated Chamber
No
Print Speed & Performance of Elegoo Neptune 4 Plus
Max Print Speed
500 mm/s
Typical Print Speed
250 mm/s
Max Acceleration
12,000 mm/s²
Max Flow Rate
30 mm³/s
Min Layer Height
0.08 mm
Max Layer Height
0.35 mm
Speed Benchy Time
17 min
Automation & Electronics of Elegoo Neptune 4 Plus
Auto Bed Leveling
Yes
Leveling Sensor Type
121-Point Non-Contact Proximity Auto Leveling
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
Yes
Built-in Camera
No
First Layer LiDAR
No
Part Cooling Fan
Auxiliary Gantry Fan Array (4x 4020 Ball-Bearing Blowers)
Hotend Fan
4010 High-Efficiency Fan
Software & Connectivity of Elegoo Neptune 4 Plus
Firmware
Klipper (64-bit 1.5GHz Quad-Core CPU)
Compatible Slicers
Elegoo Cura / OrcaSlicer / PrusaSlicer
Connectivity
Wi-Fi, USB Type-A, RJ45 Ethernet, WLAN
Display Screen
4.3-inch Magnetic Removable Capacitive Touchscreen
Input Voltage
100-240V AC 50/60Hz 500W PSU
Special Features
Pre-Installed Klipper with Input Shaping, Massive Auxiliary Gantry Fan Bar, 300°C High-Flow Ceramic Nozzle
Try to Compare Elegoo Neptune 4 Plus With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
