Sovol SV04
Sovol SV04
Printer Highlights
About Sovol SV04
Sovol SV04 is an open-frame IDEX FDM 3D printer with a 300 × 300 × 400 mm build volume, up to 120 mm/s print speed, a 260°C hotend, a 100°C heated bed, a independent dual extruder (idex) direct drive system, auto bed leveling, and up to 2-color printing support.
General Information of Sovol SV04
Printer Name
Sovol SV04
Brand
Sovol
Series
SV
Release Date
August 2021
Build Volume & Chassis of Sovol SV04
Build Volume
300 x 300 x 400 mm (11.8 x 11.8 x 15.7 in)
Build Volume (X)
300 mm (11.8 in)
Build Volume (Y)
300 mm (11.8 in)
Build Volume (Z)
400 mm (15.7 in)
Enclosed Chamber
No
Frame Type
Dual-Extrusion Aluminum Cartesian Frame
Machine Size
545 x 520 x 740 mm (21.5 x 20.5 x 29.1 in)
Machine Weight
15.0 kg (33.1 lbs)
Motion System & Kinematics of Sovol SV04
Kinematics Type
IDEX
Motion Axis Type
Dual Independent X-Carriage & Smooth Rods
Kinematics Layout
Independent Dual Extruder (IDEX)
Rail System
Precision V-Slot Wheels & Steel Rods
Dual Z-Axis
Yes
Extruder & Toolhead of Sovol SV04
Extruder Type
Independent Dual Extruder (IDEX) Direct Drive System
Toolhead Count
2
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
Brass
Supported Nozzle Diameters
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
260°C
Multi-Material Ready
Yes
Max Colors / Materials
2 Colors
Multi-Material System
Independent Dual Extrusion (IDEX - Dual Material / Soluble Support)
Bed & Thermal System of Sovol SV04
Build Plate Type
Flexible Magnetic Build Sheet
Heated Bed
Yes
Max Bed Temperature
100°C
Actively Heated Chamber
No
Print Speed & Performance of Sovol SV04
Max Print Speed
120 mm/s
Typical Print Speed
60 mm/s
Max Acceleration
1,500 mm/s²
Max Flow Rate
15 mm³/s
Min Layer Height
0.1 mm
Max Layer Height
0.35 mm
Speed Benchy Time
40 min
Automation & Electronics of Sovol SV04
Auto Bed Leveling
Yes
Leveling Sensor Type
Auto-Leveling Touch Sensor
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
No
Built-in Camera
No
First Layer LiDAR
No
Part Cooling Fan
Dual 4010 Blower Fans
Hotend Fan
Dual 4010 Axial Cooling Fans
Software & Connectivity of Sovol SV04
Firmware
Marlin 2.0 (IDEX Support)
Compatible Slicers
Sovol Cura
Connectivity
USB, SD Card
Display Screen
4.3-inch Color Touchscreen
Input Voltage
100-240V AC, 50/60Hz
Special Features
IDEX dual independent extruders, Duplication & Mirror print modes, 300x300x400mm single mode volume, Dual-material & soluble supports
Special Note on Sovol SV04
Features Independent Dual Extrusion (IDEX) with dual direct-drive toolheads supporting duplication, mirror, and dual-material printing with soluble supports across a 300 x 300 x 400 mm volume.
Try to Compare Sovol SV04 With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
