Sovol SV08 Max
Sovol SV08 Max
Printer Highlights
About Sovol SV08 Max
Sovol SV08 Max is an open-frame CoreXY FDM 3D printer with a 500 × 500 × 500 mm build volume, up to 700 mm/s print speed, a 300°C hotend, a 100°C heated bed, a planetary direct drive with high-flow hotend extruder, and auto bed leveling.
General Information of Sovol SV08 Max
Printer Name
Sovol SV08 Max
Brand
Sovol
Series
SV
Release Date
May 2025
Build Volume & Chassis of Sovol SV08 Max
Build Volume
500 x 500 x 500 mm (19.7 x 19.7 x 19.7 in)
Build Volume (X)
500 mm (19.7 in)
Build Volume (Y)
500 mm (19.7 in)
Build Volume (Z)
500 mm (19.7 in)
Enclosed Chamber
No
Frame Type
Voron 2.4-Inspired Reinforced Aluminum CoreXY Frame
Machine Size
700 x 710 x 750 mm (27.6 x 28 x 29.5 in)
Machine Weight
29.5 kg (65 lbs)
Motion System & Kinematics of Sovol SV08 Max
Kinematics Type
CoreXY
Motion Axis Type
Flying Gantry 4-Z Independent CoreXY
Kinematics Layout
Flying Gantry CoreXY
Rail System
Linear Steel Rails (X, Y, Quad Z)
Dual Z-Axis
Yes
Extruder & Toolhead of Sovol SV08 Max
Extruder Type
Planetary Direct Drive with High-Flow Hotend
Toolhead Count
1
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
Hardened Steel
Supported Nozzle Diameters
0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
300°C
Multi-Material Ready
No
Max Colors / Materials
1 Color
Bed & Thermal System of Sovol SV08 Max
Build Plate Type
Magnetic Flexible Textured PEI Spring Steel Sheet
Heated Bed
Yes
Max Bed Temperature
100°C
Actively Heated Chamber
No
Print Speed & Performance of Sovol SV08 Max
Max Print Speed
700 mm/s
Typical Print Speed
350 mm/s
Max Acceleration
40,000 mm/s²
Max Flow Rate
50 mm³/s
Min Layer Height
0.08 mm
Max Layer Height
0.36 mm
Speed Benchy Time
12 min
Automation & Electronics of Sovol SV08 Max
Auto Bed Leveling
Yes
Leveling Sensor Type
Inductive Auto-Leveling Sensor with Quad Z-Tilt Alignment
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
Yes
Built-in Camera
Yes
First Layer LiDAR
No
Part Cooling Fan
High-Power Turbo Blower Fan
Hotend Fan
Closed-Loop Axial Fan
Software & Connectivity of Sovol SV08 Max
Firmware
Mainline Open Klipper with Root Access
Compatible Slicers
OrcaSlicer / Sovol Slicer
Connectivity
Wi-Fi, Ethernet, USB, Klipper Web Interface (Mainsail/Fluidd)
Display Screen
4.3-inch Color Touchscreen
Input Voltage
100-240V AC, 50/60Hz
Special Features
Massive 500x500x500mm volume, Flying gantry 4-Z independent leveling, Pre-installed open-source Klipper, 700 mm/s print speed with 50 mm³/s high-flow hotend
Special Note on Sovol SV08 Max
Voron 2.4-inspired CoreXY 3D printer featuring a massive 500 x 500 x 500 mm build volume, pre-installed Klipper, flying gantry quad Z-axis leveling, and 700 mm/s print speed. Printer spec lists 0.4 mm standard nozzle with optional 0.6 and 0.8 mm sizes (Sovol's shared SV08 Max/Zero hardened-steel accessory nozzle pack also spans 0.2–1.0 mm).
Try to Compare Sovol SV08 Max With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
