FLSUN V400
FLSUN V400
Printer Highlights
About FLSUN V400
FLSUN V400 is an open-frame Delta FDM 3D printer with a Ø300 × 410 mm build volume, up to 400 mm/s print speed, a 300°C hotend, a 110°C heated bed, a ultra-light direct drive extruder (bi-metal hotend), and auto bed leveling.
General Information of FLSUN V400
Printer Name
FLSUN V400
Brand
FLSUN
Series
V400
Release Date
September 2022
Build Volume & Chassis of FLSUN V400
Build Volume
Ø300 x 410 mm (Ø11.8 x 16.1 in)
Build Volume (Diameter)
300 mm (11.8 in)
Build Volume (Z)
410 mm (16.1 in)
Enclosed Chamber
No
Frame Type
All-Metal Delta Architecture with Carbon Fiber Arms
Machine Size
480 x 480 x 1030 mm (18.9 x 18.9 x 40.6 in)
Machine Weight
17.0 kg (37.5 lbs)
Motion System & Kinematics of FLSUN V400
Kinematics Type
Delta
Motion Axis Type
Delta Linear Dual-Axis Rails & Carbon Rods
Kinematics Layout
Delta 3-Axis
Rail System
Linear Steel Rails
Dual Z-Axis
No
Extruder & Toolhead of FLSUN V400
Extruder Type
Ultra-Light Direct Drive Extruder (Bi-Metal Hotend)
Toolhead Count
1
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
Bi-metal Plated Copper
Supported Nozzle Diameters
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
300°C
Multi-Material Ready
No
Max Colors / Materials
1 Color
Bed & Thermal System of FLSUN V400
Build Plate Type
Textured PEI Spring Steel Round Bed
Heated Bed
Yes
Max Bed Temperature
110°C
Actively Heated Chamber
No
Print Speed & Performance of FLSUN V400
Max Print Speed
400 mm/s
Typical Print Speed
250 mm/s
Max Acceleration
10,000 mm/s²
Max Flow Rate
30 mm³/s
Min Layer Height
0.05 mm
Max Layer Height
0.35 mm
Speed Benchy Time
16 min
Automation & Electronics of FLSUN V400
Auto Bed Leveling
Yes
Leveling Sensor Type
Leveling Switch Sensor (Automatic Calibration)
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
Yes
Built-in Camera
No
First Layer LiDAR
No
Part Cooling Fan
Dual 4010 High-Speed Blower Fans
Hotend Fan
Axial Cooling Fan
Software & Connectivity of FLSUN V400
Firmware
Pre-installed Klipper (Speeder Pad)
Compatible Slicers
Cura / Flsun Slicer
Connectivity
Wi-Fi, USB, Pre-installed Klipper Interface (SpeedPad)
Display Screen
7-inch IPS Capacitive Touchscreen (Klipper Speeder Pad)
Input Voltage
100-240V AC, 50/60Hz
Special Features
Pre-installed Klipper with Speeder Pad, Ø300x410mm cylindrical volume, Carbon fiber parallel arms, Bi-metal 300°C hotend
Try to Compare FLSUN V400 With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
