FLSUN T1
FLSUN T1
Printer Highlights
About FLSUN T1
FLSUN T1 is an enclosed Delta FDM 3D printer with a Ø260 × 330 mm build volume, up to 1,000 mm/s print speed, a 300°C hotend, a 110°C heated bed, a ultra-lightweight dual-gear direct drive extruder, and auto bed leveling.
General Information of FLSUN T1
Printer Name
FLSUN T1
Brand
FLSUN
Series
T1
Release Date
May 2024
Build Volume & Chassis of FLSUN T1
Build Volume
Ø260 x 330 mm (Ø10.2 x 13 in)
Build Volume (Diameter)
260 mm (10.2 in)
Build Volume (Z)
330 mm (13 in)
Enclosed Chamber
Yes
Frame Type
Enclosed All-Metal Delta Architecture with Acrylic Panels
Machine Size
436 x 490 x 838 mm (17.2 x 19.3 x 33 in)
Machine Weight
18.44 kg (40.7 lbs)
Motion System & Kinematics of FLSUN T1
Kinematics Type
Delta
Motion Axis Type
High-Speed Delta Linear Dual-Axis Rails & Carbon Fiber Rods
Kinematics Layout
Delta 3-Axis
Rail System
High-Precision Dual Linear Rails
Dual Z-Axis
No
Extruder & Toolhead of FLSUN T1
Extruder Type
Ultra-Lightweight Dual-Gear Direct Drive Extruder
Toolhead Count
1
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
High-Flow Brass Volcano Nozzle
Supported Nozzle Diameters
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
300°C
Multi-Material Ready
No
Max Colors / Materials
1 Color
Bed & Thermal System of FLSUN T1
Build Plate Type
Textured PEI Spring Steel Round Plate
Heated Bed
Yes
Max Bed Temperature
110°C
Actively Heated Chamber
No
Print Speed & Performance of FLSUN T1
Max Print Speed
1,000 mm/s
Typical Print Speed
500 mm/s
Max Acceleration
30,000 mm/s²
Max Flow Rate
90 mm³/s
Min Layer Height
0.05 mm
Max Layer Height
0.35 mm
Speed Benchy Time
10 min
Automation & Electronics of FLSUN T1
Auto Bed Leveling
Yes
Leveling Sensor Type
Full-Auto Calibration Bed Leveling
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
Yes
Built-in Camera
Yes
First Layer LiDAR
No
Part Cooling Fan
CPAP Turbo Cooling Fan (30,000 RPM)
Hotend Fan
Axial Cooling Fan
Software & Connectivity of FLSUN T1
Firmware
Klipper-based Flsun OS
Compatible Slicers
Flsun Slicer / OrcaSlicer
Connectivity
Wi-Fi, USB, Flsun OS Klipper Interface
Display Screen
4.3-inch Color Touchscreen
Input Voltage
100-240V AC, 50/60Hz
Special Features
Blistering 1000 mm/s print speed, 30,000 mm/s² acceleration, 90 mm³/s ultra-high flow rate, Enclosed delta chamber, AI monitoring camera
Special Note on FLSUN T1
Enclosed delta 3D printer with Ø260 x 330 mm build volume, up to 1000 mm/s print speed, 30,000 mm/s² acceleration, and an integrated AI monitoring camera.
Try to Compare FLSUN T1 With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
