Creality Ender-3 S1
Creality Ender-3 S1
Printer Highlights
About Creality Ender-3 S1
Creality Ender-3 S1 is an open-frame Bedslinger FDM 3D printer with a 220 × 220 × 270 mm build volume, up to 150 mm/s print speed, a 260°C hotend, a 100°C heated bed, a sprite dual-gear direct drive extruder, and auto bed leveling.
General Information of Creality Ender-3 S1
Printer Name
Creality Ender-3 S1
Brand
Creality
Series
Ender
Release Date
December 2021
Build Volume & Chassis of Creality Ender-3 S1
Build Volume
220 x 220 x 270 mm (8.7 x 8.7 x 10.6 in)
Build Volume (X)
220 mm (8.7 in)
Build Volume (Y)
220 mm (8.7 in)
Build Volume (Z)
270 mm (10.6 in)
Enclosed Chamber
No
Frame Type
Die-Cast Aluminum Frame with Dual Z Gantry
Machine Size
487 x 453 x 622 mm (19.2 x 17.8 x 24.5 in)
Machine Weight
9.1 kg (20.1 lbs)
Motion System & Kinematics of Creality Ender-3 S1
Kinematics Type
Bedslinger
Motion Axis Type
Dual Z Leadscrews with Synchronized Timing Belt
Kinematics Layout
Moving Bed Cartesian Bedslinger
Rail System
V-Slot Extrusions & Dual Z Leadscrews
Dual Z-Axis
Yes
Extruder & Toolhead of Creality Ender-3 S1
Extruder Type
Sprite Dual-Gear Direct Drive Extruder
Toolhead Count
1
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
Brass
Supported Nozzle Diameters
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
260°C
Multi-Material Ready
No
Max Colors / Materials
1 Color
Bed & Thermal System of Creality Ender-3 S1
Build Plate Type
PC Spring Steel Magnetic Heated Bed
Heated Bed
Yes
Max Bed Temperature
100°C
Actively Heated Chamber
No
Print Speed & Performance of Creality Ender-3 S1
Max Print Speed
150 mm/s
Typical Print Speed
60–80 mm/s
Max Acceleration
1,500 mm/s²
Max Flow Rate
14 mm³/s
Min Layer Height
0.05 mm
Max Layer Height
0.35 mm
Automation & Electronics of Creality Ender-3 S1
Auto Bed Leveling
Yes
Leveling Sensor Type
CR Touch 16-Point Optical Auto-Leveling Sensor
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
No
Built-in Camera
No
First Layer LiDAR
No
Part Cooling Fan
4010 Blower Fan
Hotend Fan
4010 Axial Fan
Software & Connectivity of Creality Ender-3 S1
Firmware
Creality 32-bit Silent Marlin
Compatible Slicers
Creality Slicer / Cura
Connectivity
SD Card, Type-C USB
Display Screen
4.3-inch Color Knob Screen
Input Voltage
100-240V AC
Special Features
Sprite Dual-Gear Direct Drive Extruder (3.5:1 Ratio), CR Touch 16-Point Auto-Bed Leveling, Synchronized Dual Z-Axis Motors with Timing Belt, PC Spring Steel Flexible Magnetic Sheet, Expanded 270 mm Height Build Volume
Try to Compare Creality Ender-3 S1 With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
