Bambu Lab A1
Bambu Lab A1
Printer Highlights
About Bambu Lab A1
Bambu Lab A1 is an open-frame Bedslinger FDM 3D printer with a 256 × 256 × 256 mm build volume, up to 500 mm/s print speed, a 300°C hotend, a 100°C heated bed, a direct drive extruder, auto bed leveling, and up to 4-color printing support.
General Information of Bambu Lab A1
Printer Name
Bambu Lab A1
Brand
Bambu Lab
Series
A1
Release Date
December 14, 2023
Build Volume & Chassis of Bambu Lab A1
Build Volume
256 x 256 x 256 mm (10.1 x 10.1 x 10.1 in)
Build Volume (X)
256 mm (10.1 in)
Build Volume (Y)
256 mm (10.1 in)
Build Volume (Z)
256 mm (10.1 in)
Enclosed Chamber
No
Frame Type
Cartesian Bedslinger
Machine Size
465 x 410 x 430 mm (18.3 x 16.1 x 16.9 in)
Machine Weight
8.3 kg (18.3 lbs)
Motion System & Kinematics of Bambu Lab A1
Kinematics Type
Bedslinger
Motion Axis Type
Linear Rails (X, Z) & Dual Guide Rods (Y)
Kinematics Layout
Cartesian Bedslinger
Rail System
All-Metal Linear Rails
Dual Z-Axis
Yes
Extruder & Toolhead of Bambu Lab A1
Extruder Type
Direct Drive
Toolhead Count
1
Filament Diameter
1.75 mm
Nozzle Diameter
0.4 mm
Nozzle Material
Stainless Steel Quick-Swap
Supported Nozzle Diameters
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Max Nozzle Temp
300°C
Multi-Material Ready
Yes
Max Colors / Materials
4 Colors
Multi-Material System
Bambu Lab AMS lite (Optional Add-on / Combo, 4 Colors)
Bed & Thermal System of Bambu Lab A1
Build Plate Type
Textured PEI Plate
Heated Bed
Yes
Max Bed Temperature
100°C
Actively Heated Chamber
No
Print Speed & Performance of Bambu Lab A1
Max Print Speed
500 mm/s
Typical Print Speed
250–300 mm/s
Max Acceleration
10,000 mm/s²
Max Flow Rate
28 mm³/s
Min Layer Height
0.08 mm
Max Layer Height
0.28 mm
Speed Benchy Time
14 min
Automation & Electronics of Bambu Lab A1
Auto Bed Leveling
Yes
Leveling Sensor Type
Full-Auto Nozzle Contact Probing
Filament Runout Sensor
Yes
Power Loss Recovery
Yes
Input Shaping (Resonance)
Yes
Built-in Camera
Yes
First Layer LiDAR
No
Part Cooling Fan
High-Speed Part Cooling Fan
Hotend Fan
Toolhead Heat Sink Fan
Software & Connectivity of Bambu Lab A1
Firmware
Bambu OS
Compatible Slicers
Bambu Studio / OrcaSlicer
Connectivity
Wi-Fi, MicroSD
Display Screen
3.5-inch Color IPS Touchscreen
Input Voltage
100-240V AC
Special Features
Active Flow Rate Compensation, Active Motor Noise Cancellation, Quick-Swap Nozzle, Automated Filament Tangle Detection
Try to Compare Bambu Lab A1 With Another 3D Printer
Similar 3D Printers to Explore
Explore other 3D printers with comparable architecture and capability.
